Myanmar Project: FHB200 Lithium Batteries with FHC 20 kW Inverters
A multi-unit FarAmp energy storage deployment combining FHB200 lithium battery systems with FHC 20 kW inverters for dependable site power in Myanmar.
This Myanmar project uses FarAmp FHB200 lithium battery systems together with FHC 20 kW inverters in a multi-unit energy storage installation. The photographed equipment was prepared as an integrated battery-and-inverter solution for dependable site power. For a deployment of this scale, battery quantity, inverter operating mode, BMS communication, protection devices, cable sizing and load priorities must be coordinated against the approved project design.
FHB200 battery and FHC 20 kW inverter integration
The FHB200 batteries provide the storage platform, while the FHC 20 kW inverters manage power conversion between the battery system, solar generation and connected loads. Matching the battery voltage window and communication protocol with the inverter configuration is essential before commissioning.
Key commissioning checks for the Myanmar installation
- Confirm battery addressing, BMS communication and inverter protocol settings
- Verify charge and discharge current limits against the approved system configuration
- Check cable sizing, grounding, breakers and isolation devices before energizing
- Test operating modes, backup priorities and system response under representative loads
- Maintain ventilation and service clearances around every battery and inverter unit
Project support from FarAmp
FarAmp supports model selection, battery and inverter matching, communication setup, project documentation and commissioning coordination for overseas energy storage projects. Final electrical parameters and protection settings are confirmed for the delivered configuration and local installation conditions.
Frequently asked questions
Which FarAmp products are used in this Myanmar project?
The installation combines FarAmp FHB200 lithium battery systems with FarAmp FHC 20 kW inverters.
What should be checked before commissioning the FHB200 and FHC 20 kW system?
The installer should verify the battery voltage window, BMS communication, inverter settings, current limits, cable sizing, grounding, protective devices and operating mode against the approved project design.
Can FarAmp support similar commercial energy storage projects?
Yes. FarAmp can support product selection, battery-inverter matching, communication configuration, documentation and project coordination. The final solution is defined by the site load, backup requirement, solar capacity and installation environment.
Engineering Support
- FarAmp FHB200 lithium battery systems deployed in a multi-unit configuration
- FHC 20 kW inverter integration for site power conversion and energy management
- Battery, inverter, protection and communication settings coordinated as one system